In this work, we demonstrate the offline FPGA realization of both recurrent and feedforward neural network (NN)-based equalizers for nonlinearity compensation in coherent optical transmission systems. First, we present a realization pipeline showing the conversion of the models from Python libraries to the FPGA chip synthesis and implementation. Then, we review the main alternatives for the hardware implementation of nonlinear activation functions. The main results are divided into three parts: a performance comparison, an analysis of how activation functions are implemented, and a report on the complexity of the hardware. The performance in Q-factor is presented for the cases of bidirectional long-short-term memory coupled with convolutional NN (biLSTM + CNN) equalizer, CNN equalizer, and standard 1-StpS digital back-propagation (DBP) for the simulation and experiment propagation of a single channel dual-polarization (SC-DP) 16QAM at 34 GBd along 17x70km of LEAF. The biLSTM+CNN equalizer provides a similar result to DBP and a 1.7 dB Q-factor gain compared with the chromatic dispersion compensation baseline in the experimental dataset. After that, we assess the Q-factor and the impact of hardware utilization when approximating the activation functions of NN using Taylor series, piecewise linear, and look-up table (LUT) approximations. We also show how to mitigate the approximation errors with extra training and provide some insights into possible gradient problems in the LUT approximation. Finally, to evaluate the complexity of hardware implementation to achieve 400G throughput, fixed-point NN-based equalizers with approximated activation functions are developed and implemented in an FPGA.

To circumvent the non-parallelizability of recurrent neural network-based equalizers, we propose knowledge distillation to recast the RNN into a parallelizable feedforward structure. The latter shows 38\% latency decrease, while impacting the Q-factor by only 0.5dB.

在本文中，提出了一种新的方法，该方法允许基于神经网络（NN）均衡器的低复杂性发展，以缓解高速相干光学传输系统中的损伤。在这项工作中，我们提供了已应用于馈电和经常性NN设计的各种深层模型压缩方法的全面描述和比较。此外，我们评估了这些策略对每个NN均衡器的性能的影响。考虑量化，重量聚类，修剪和其他用于模型压缩的尖端策略。在这项工作中，我们提出并评估贝叶斯优化辅助压缩，其中选择了压缩的超参数以同时降低复杂性并提高性能。总之，通过使用模拟和实验数据来评估每种压缩方法的复杂性及其性能之间的权衡，以完成分析。通过利用最佳压缩方法，我们表明可以设计基于NN的均衡器，该均衡器比传统的数字背部传播（DBP）均衡器具有更好的性能，并且只有一个步骤。这是通过减少使用加权聚类和修剪算法后在NN均衡器中使用的乘数数量来完成的。此外，我们证明了基于NN的均衡器也可以实现卓越的性能，同时仍然保持与完整的电子色色散补偿块相同的复杂性。我们通过强调开放问题和现有挑战以及未来的研究方向来结束分析。

在本文中，我们提供了一种系统的方法来评估和比较数字信号处理中神经网络层的计算复杂性。我们提供并链接四个软件到硬件的复杂性度量，定义了不同的复杂度指标与层的超参数的关系。本文解释了如何计算这四个指标以进行馈送和经常性层，并定义在这种情况下，我们应该根据我们是否表征了面向更软件或硬件的应用程序来使用特定的度量。新引入的四个指标之一，称为“添加和位移位数（NAB）”，用于异质量化。 NABS不仅表征了操作中使用的位宽的影响，还表征了算术操作中使用的量化类型。我们打算这项工作作为与神经网络在实时数字信号处理中应用相关的复杂性估计级别（目的）的基线，旨在统一计算复杂性估计。

FPGA中首次实施了针对非线性补偿的经常性和前馈神经网络均衡器，其复杂度与分散均衡器的复杂度相当。我们证明，基于NN的均衡器可以胜过1个速度的DBP。

人工神经网络的许多现代应用随之而来的是大量层，使传统的数字实施越来越复杂。光学神经网络在高带宽处提供并行处理，但面临噪声积累的挑战。我们在这里提出了一种新型的神经网络，使用随机共振作为体系结构的固有部分，并证明了以给定性能准确性大量减少所需神经元数量的可能性。我们还表明，这种神经网络对噪声的影响更强大。

This paper describes a prototype software and hardware platform to provide support to field operators during the inspection of surface defects of non-metallic pipes. Inspection is carried out by video filming defects created on the same surface in real-time using a "smart" helmet device and other mobile devices. The work focuses on the detection and recognition of the defects which appears as colored iridescence of reflected light caused by the diffraction effect arising from the presence of internal stresses in the inspected material. The platform allows you to carry out preliminary analysis directly on the device in offline mode, and, if a connection to the network is established, the received data is transmitted to the server for post-processing to extract information about possible defects that were not detected at the previous stage. The paper presents a description of the stages of design, formal description, and implementation details of the platform. It also provides descriptions of the models used to recognize defects and examples of the result of the work.

The paper discusses the improvement of the accuracy of an inertial navigation system created on the basis of MEMS sensors using machine learning (ML) methods. As input data for the classifier, we used infor-mation obtained from a developed laboratory setup with MEMS sensors on a sealed platform with the ability to adjust its tilt angles. To assess the effectiveness of the models, test curves were constructed with different values of the parameters of these models for each core in the case of a linear, polynomial radial basis function. The inverse regularization parameter was used as a parameter. The proposed algorithm based on MO has demonstrated its ability to correctly classify in the presence of noise typical for MEMS sensors, where good classification results were obtained when choosing the optimal values of hyperpa-rameters.

An algorithm and a program for detecting the boundaries of water bodies for the autopilot module of asurface robot are proposed. A method for detecting water objects on satellite maps by the method of finding a color in the HSV color space, using erosion, dilation - methods of digital image filtering is applied.The following operators for constructing contours on the image are investigated: the operators of Sobel,Roberts, Prewitt, and from them the one that detects the boundary more accurately is selected for thismodule. An algorithm for calculating the GPS coordinates of the contours is created. The proposed algorithm allows saving the result in a format suitable for the surface robot autopilot module.

The efficiency of using the YOLOV5 machine learning model for solving the problem of automatic de-tection and recognition of micro-objects in the marine environment is studied. Samples of microplankton and microplastics were prepared, according to which a database of classified images was collected for training an image recognition neural network. The results of experiments using a trained network to find micro-objects in photo and video images in real time are presented. Experimental studies have shown high efficiency, comparable to manual recognition, of the proposed model in solving problems of detect-ing micro-objects in the marine environment.